How to Install Windows Server 2003

Installing Windows Server 2003 using Windows Server 2003 CD are as follows:
1.Make sure your computer is mounted CD-ROM and boot the computer starts the beginning of the CD-ROM
2.Insert the Windows Server 2003 CD into the CD-ROM drive, then restart your computer
3.The computer will boot process via CD-ROM drive that already contains Windows Server 2003 CD maters. A moment later, the choice will appear as follows
 
4.Then press ENTER to enter the EULA screen
  
5.Then press f8 on the keyboard for windows server 2003 license agreement until the display appears as follows
  
6.If the hard drive is empty then we have to create a partition for windows server 2003 system. Press "C" to create a partition and enter the partition size is needed, if it is complete then press ENTER, then format the partition with NTFS filesystem quickformat method as shown below 
 7.And then press ENTER, then the windows server 2003 setup will format a disk partition, such as those displayed in the picture below 

8.After formatting is complete, then the windows server 2003 will copy the files to the partition windws

9.The next windows 2003 server will restart the computer and reboot. On windows server setup GUI, as shown below:

10.Wait a while until the wizard appears below:

11.Select 'Customize',

12.Do a setting such as Indonesia and select Click 'OK' back to the previous screen and click 'Next'

13.Fill in your name and organization name. Then click 'Next'.

14.Fill with Windows Server 2003 CD key that came with Windows Server 2003 CD. Namely: JK6JC - P7P7H - 4HRFC - 3XM7P - G33HM, then click 'Next

15.Choose Licensing Mode "Per Server" and fill in the number of connections needed. Click 'Next'.

16.Fill in the 'Computer Name' and password for the Administrator. Click 'Next'

17.Select the 'Time Zone' with the (GMT +07:00) Bangkok, Hanoi, Jakarta. Click 'Next

18.Then the setup will install the Network

19.Select 'Custom settings' and click 'Nex

20.Select the components 'Internet Protocol (TCP / IP)' and click 'Properties'.

21.Fill 'IP address', 'Subnet mask', 'Default gateway:' according to your network configuration. Click 'OK'. Then click 'Next'

22.Fill in the Workgroup name is desired, for example: 'VOUCHA'. and click 'Next'

23.Setup copies files to the Windows partition components. After that Setup will restart and reboot your computer.