Often found in computer usage problems ata PC, when we want to use or using a PC, it will not turn on the PC, it makes users panic and rush immediately brought into or call a computer service technician
Before you give up and bring your computer to the service, it would be nice if you try to analyze what is causing your computer inoperable. The most common way if the computer "will not turn on" the power to the PC is actually entered but not display anything on the monitor.
You see the lights on the computer and hear the fan working from inside but did not appear on your screen.
There are several possible reasons why your monitor is not displaying the information so it is important for you to find out what causes it in the steps below.
1. Check your monitor. Before you begin to solve problems and check the components in your CPU, make sure your monitor is working properly and not a computer monitor that is causing the problem.
Because it could be your computer monitor because your life is not damaged or broken there is a monitor cable or cord is not plugged into the VGA socket.
2. Make sure that your PC is fully plugged in an electric.
Often times there does not appear on the computer monitor when the computer is actually in keadaanStandby or Hibernate (power saving mode) on a Windows system.
Note: You can actually turn off your computer in Hibernate mode state by holding the power button for 3 to 5 seconds. Once the power is really off, turn on your PC and test to see if your computer will boot normally.
3. With BEP code if you hear a beep code will give you the exact input where you can find the cause of death of your computer such Beb code.
If you can not resolve the problem with a particular problem BEP code, you can always go back to the beginning and continue with the steps below.
4. Clear CMOS. Erase memory on your motherboard BIOS will return the BIOS settings to factory default settings. Result of an error BIOS settings can cause your PC can not startup.
Important: If the way mengclear CMOS did not fix your problem, make sure any changes you make in the BIOS solved one by one so that if re having problems, you will know where the changes are causing your computer problems.
5. Make sure the power supply voltage switch is set correctly. If the input voltage to the power supply is not true (according to the required voltage) then your computer will not turn on fully.
It is possible that your PC will not turn at all if the power does not meet the required standard voltage, but voltage is not correct power supply can also cause your computer can not afford in turn.
6. Replace anything that might be present in your PC. Setting back will probably be able to restore the various connections on the computer.
Before you give up and bring your computer to the service, it would be nice if you try to analyze what is causing your computer inoperable. The most common way if the computer "will not turn on" the power to the PC is actually entered but not display anything on the monitor.
You see the lights on the computer and hear the fan working from inside but did not appear on your screen.
There are several possible reasons why your monitor is not displaying the information so it is important for you to find out what causes it in the steps below.
1. Check your monitor. Before you begin to solve problems and check the components in your CPU, make sure your monitor is working properly and not a computer monitor that is causing the problem.
Because it could be your computer monitor because your life is not damaged or broken there is a monitor cable or cord is not plugged into the VGA socket.
2. Make sure that your PC is fully plugged in an electric.
Often times there does not appear on the computer monitor when the computer is actually in keadaanStandby or Hibernate (power saving mode) on a Windows system.
Note: You can actually turn off your computer in Hibernate mode state by holding the power button for 3 to 5 seconds. Once the power is really off, turn on your PC and test to see if your computer will boot normally.
3. With BEP code if you hear a beep code will give you the exact input where you can find the cause of death of your computer such Beb code.
If you can not resolve the problem with a particular problem BEP code, you can always go back to the beginning and continue with the steps below.
4. Clear CMOS. Erase memory on your motherboard BIOS will return the BIOS settings to factory default settings. Result of an error BIOS settings can cause your PC can not startup.
Important: If the way mengclear CMOS did not fix your problem, make sure any changes you make in the BIOS solved one by one so that if re having problems, you will know where the changes are causing your computer problems.
5. Make sure the power supply voltage switch is set correctly. If the input voltage to the power supply is not true (according to the required voltage) then your computer will not turn on fully.
It is possible that your PC will not turn at all if the power does not meet the required standard voltage, but voltage is not correct power supply can also cause your computer can not afford in turn.
6. Replace anything that might be present in your PC. Setting back will probably be able to restore the various connections on the computer.
Try reinstalling your hardware in the following way and then see if your computer begins to display something on the screen:
a. Replace all internal data cables and power cables
b. Replace the memory module
c. Reinstall all expansion cards
7. Reseat the CPU if you suspect that maybe the cpu is loose or you have not installed correctly.
8. Check the cause of short circuit current of electricity in your computer. This often causes problems when the computer power off by itself due to short circuit currents can cause your computer will not turn on.
9. Test your power supplay. PSU tends to cause more problems than other hardware and often the cause of the computer will not turn on.
Replace the power supply immediately if you fail every test that you do.
10. Turn on your computer with the hardware necessary. The purpose here is to remove as much hardware as possible and still maintain your PC the ability to get power.
If your computer starts normally with only essential hardware is installed, go to Step 11.
If your computer still does not display anything on your monitor, go to Step 12.
Important: This step is easy enough for beginners to get it done, do not require special equipment.
11. Reinstall every piece of hardware that you removed in Step 10, one by one, and restart your computer.
Because your computer is turned on with only the essential hardware is installed, the components should work fine. This means that one of the hardware components that you'd loose that cause your PC will not turn on. By installing each device back to your PC and do the test every time a component is installed, then you will find problems that cause your computer to death
12. Test your computer's hardware by using the Power On Self Test card. If your PC still does not display information on your monitor with just installing the essential hardware only, POST cards will help identify any other hardware that causes your computer unusable.
If you do not have and do not want to buy a POST card, go to Step 13
13. Replace any important piece of hardware in your computer with kompouter component parts identical or similar to the hardware installed on your computer, Test after each replacement hardware to determine the faulty component.
Note: The average computer user does not have a reserve component. If you do not have it, my advice is to go back to Step 12. Buy POST card is cheaper than providing spare parts for computers.
14. Finally, if all else fails, means there is damage to the motherboard of your computer, chances are your computer chipset that has been damaged and does not work that caused your computer can not turn it on.
a. Replace all internal data cables and power cables
b. Replace the memory module
c. Reinstall all expansion cards
7. Reseat the CPU if you suspect that maybe the cpu is loose or you have not installed correctly.
8. Check the cause of short circuit current of electricity in your computer. This often causes problems when the computer power off by itself due to short circuit currents can cause your computer will not turn on.
9. Test your power supplay. PSU tends to cause more problems than other hardware and often the cause of the computer will not turn on.
Replace the power supply immediately if you fail every test that you do.
10. Turn on your computer with the hardware necessary. The purpose here is to remove as much hardware as possible and still maintain your PC the ability to get power.
If your computer starts normally with only essential hardware is installed, go to Step 11.
If your computer still does not display anything on your monitor, go to Step 12.
Important: This step is easy enough for beginners to get it done, do not require special equipment.
11. Reinstall every piece of hardware that you removed in Step 10, one by one, and restart your computer.
Because your computer is turned on with only the essential hardware is installed, the components should work fine. This means that one of the hardware components that you'd loose that cause your PC will not turn on. By installing each device back to your PC and do the test every time a component is installed, then you will find problems that cause your computer to death
12. Test your computer's hardware by using the Power On Self Test card. If your PC still does not display information on your monitor with just installing the essential hardware only, POST cards will help identify any other hardware that causes your computer unusable.
If you do not have and do not want to buy a POST card, go to Step 13
13. Replace any important piece of hardware in your computer with kompouter component parts identical or similar to the hardware installed on your computer, Test after each replacement hardware to determine the faulty component.
Note: The average computer user does not have a reserve component. If you do not have it, my advice is to go back to Step 12. Buy POST card is cheaper than providing spare parts for computers.
14. Finally, if all else fails, means there is damage to the motherboard of your computer, chances are your computer chipset that has been damaged and does not work that caused your computer can not turn it on.
No comments:
Post a Comment